The American DJ Mini Tri Ball LED is a mini rotating ball disco party light effect that creates mirror disco ball type effect and can run all night. The Mini Tri Ball projects 56 sound activated beams that change color, spin and flash to the beat of the music. You can choose constant rotation or sound active rotation of the beams for a disco ball effect or no rotation and fill your room with clear sharp beams.
The Mini Tri Ball LED is easy-to-use and ready to run out of the box, just plug it in, set your choice of disco light effect and enjoy. The Mini Tri Ball carries a three year (1095 days) limited warranty.
Homeowners, clubs and DJs will also appreciate the many other benefits that the Mini Tri Ball LED’s technology brings, such as low heat production. This keeps things cooler on the dance floor, and lets you run the Mini Tri Ball LED all night long without duty cycles, for a high-energy light show that never quits.
Mini Tri Ball LED Features: Produces 56 sound activated beams that change color and strobe to the sound of music
2 x 3-watt 3-in-1 RGB “TRI Color” LEDs produces a variety of color effects (Red, Green, Blue, Purple, Yellow, Cyan & White)
3-position FX switch: constant rotation, no rotation or sound active rotation
Run all night - no duty cycle
Light weight and very mobile
Long life LEDs (100,000 hr. rating)
Beam angle: 180 degrees
Ball rotation: 15 RPM
Use with or without fog
Beams cover a wide area
Units stay cool
Multi-voltage operation: AC 100~240V, 50/60Hz
Power Consumption: 13W
Dimensions: 7.75 inches long x 7.75 inches wide x 6 inches long
Weight: 4 Pounds
Operating Modes:
Switch in the "I" position: Mode 1 - In this mode the dome will spin continuously, regardless of the presence of sound. The colors and strobe effect will react to sound.
Switch in the “0” static position: Mode 2 - In this mode the dome will remain static, and the colors and strobe effect will react to sound.
Switch in the “II” sound active position: Mode 3 - In this mode the dome, colors, and strobe effect will react to sound. Note:The music sensitivity is preset at the factory and may not be changed or adjusted. Tapping on the unit, or high-pitched sounds may not trigger the unit, the unit is designed to react to low frequencies (bass). The unit will stop after 10 seconds if no sound is present.